Top
  Login    Register    
 
Home About us Products News & Events Policy & Support Download Contact us Blog  
  News & Events
    New Product Launch
    Company News
    Lighting Science
  Contact
Tel:86-020-22078445
Fax:86-020-22078445
Email:info@maker-lighting.com
Add:香港九龙旺角道33号凯途发展大厦7楼04室


 News & Events Home  >  News & Events > HID-EB Low Frequency Electronic Ballast - Maker Lighting October

HID-EB Low Frequency Electronic Ballast - Maker Lighting October

 
Dear Customer,
 
Lighting makes life better. CDM lamps and MH lamps are widely used in commercial lighting, street lighting, etc.

 

 

We are pleased introduce you our HID-EB Low Frequency Electronic Ballast as below.
 
Brief Introduction
HID-EB series electronic ballasts (HID) are the new-type low frequency electronic ballast, suitable for CDM lamps and metal halide lamps. It is characterized as energy-conserving and nearly noiseless to the electric wire netting, and suitable for the low-quality illumination required, and it is the new green lighting products.

Technical Parameter (for CDM&MH Lamps)

Type

  HID-EB20W

  HID-EB35W

  HID-EB50W

 HID-EB70W

 HID-EB100W

HID-EB150W

Input voltage

 120V / 240V

 120V / 240V

 120V / 240V

 120V / 240V

 120V / 240V

120V / 240V

Frequency

 50Hz / 60Hz

 50Hz / 60Hz

 50Hz / 60Hz

 50Hz / 60Hz

 50Hz / 60Hz

50Hz / 60Hz

Input current

 0.18A / 0.09A

 0.35A / 0.18A

0.45A/ 0.23A

 0.70 A/ 0.35A

 0.96A / 0.48A

1.35A / 0.68A

Power factor

    ≥0.98

   ≥0.98

    ≥0.98

    ≥0.98

    ≥0.98

   ≥0.98

Input power

    23W

   42W

    55W

    79W

    115W

   162W

Start current

 About 0.09A

 About 0.15A

 About 0.30A

 About 0.30A

About 0.45A

About 0.65A

Operating voltage Range

  90V~260V

  90V~260V

 90V~260V

  90V~260V

  90V~260V

  90V~260V

Total harmonic distortion

    <10%

    <10%

    <10%

    <10%

    <10%

    <10%

Operating temperature

 -40~+60

 -40~+60

 -40~+60

 -40~+60

 -40~+60

 -40~+60

Size (L*W*H)

100*68*35mm

100*68*35mm

120*85*35mm

120*85*35mm

150*80*70mm

180*80*70mm

Net weight

   0.18KG

  0.18KG

    0.28KG

  0.28KG

  0.50KG

   0.80KG

Efficiency

    95%

    95%

     95%

    95%

    95%

     95%

Superior Characteristics
 
The EB electronic ballast has the following advantages:
1.    Wide working voltage range: 90V~260V, it is applicable to the fluctuating in voltage of the power supply.
2.    Small start current: The start current of HID-EB series electronic ballast is small, which can lengthen service life and reduce the expenses for the first installation.
3.    High power factor: ≥0.98
4.    Permanent power: Constant output power by voltage fluctuating 90V~260V, can guarantee lighting quality and illumination intensity permanently.
5.    Wide application range: Do not flicker even though working with low quality bulbs whose frequency is 120Hz, suitable for the commercial lighting.
6.    Low harmonic content: THD<10%.
7.    Protective function: Break circuit, short circuit and hot protection.
8.    Simple installation: No need other boots, no need external compensating capacitor. 
 
Installation Instructions
 
1.      Use:
The electronic ballast is used with HID lamps. The trigger function is integrated inside. It has excellent features of high efficient, safe, constant output power etc., and can be used in such places as road, square, station, quay and factory, etc.
 
2.      Installation:

 

Please install the circuit according to the diagram and guarantee the reliable connection for each point.
 
Please use the cable which can bear voltage > 6KV between the electronic ballast and the light. The length should not exceed 20 meters. Make adjustment according to the installation and specific demands.
 
Cautions
1.      To ensure the best working state of light source, the electronic ballast should be used together with the corresponding related bulbs.
2.      The instantaneous output voltage may reach above 3KV (reaches the end of the light ). When not in use, for maintaining please switch off the power.
3.      The input rated voltage-frequency is 120V / 240V, 50Hz / 60Hz, and the operating voltage range is 90V~260V. Please don't try to use the electronic ballast in the exceeding voltage range.
4.      Environment temperature should be -40℃~+50℃. If the temperature exceeds this range, the bulb can’t start normally and the ballast life-span will be shortened.
5.      The electronic ballast could restart after the lamp is cooled. Because of the different characteristic between high-pressure sodium lamp and metal halide lamp, there is a time difference to restart the device. The sodium lamp may need to wait 1-2 minutes, and the metal halide lamp may need to wait 3-6 minutes. 
 
Common Faults and Troubleshooting

Fault Phenomenon

Treatment

 

Cannot light up after installation

 

1.    Confirm whether there is rated input voltage;

2.    Electrify the ballast for 2 minutes. If it still can't light up, turn off the power, and check whether the circuit maintain in good contact.

3.     Replace the lamp and then try again.

 

The bulb goes out immediately after light up

1.    Check whether the bulb is tight, or the power cord is in good contact;

2.    Check whether the bulb restarts after goes out or the bulb is completely cooled;

3.     If this situation still remains, replace the bulb.

Although working but continuously flashing

1.      Check whether the bulb is tight;

2.      Whether the bulb works in the more violent vibrations place;

3.      Replace the bulb.

 

 

The bulb goes out after working for a long time

1.    The environment temperature is too high that the ballast comes to overheat protection automatically (This phenomenon may occur when installation environment temperature exceeds 70);

2.    Lamp life has reached, please replace it;

3.     Replace the ballast.

Remarks:
Maker Lighting Company Limited has the final explanation right!
 
Best Regards,
Marketing Team
Maker Lighting Company Limited
The professional Lighting Supplier!
ISO 9001 &14001, CE, RoHS, UL, CSA Certificated
PRC Tel: +86-020-22078445
HK Address: UNIT 04, 7/F, BRIGHT WAY TOWER 33 MONG KOK RD, KL, HK
BORDER-BOTTOM: windowtext 1pt solid; BORDER-LEFT: medium none; PADDING-BOTTOM: 0cm; PADDING-LEFT: 5.4pt; WIDTH: 77.35pt; PADDING-RIGHT: 5.4pt; HEIGHT: 14.5pt; BORDER-TOP: medium none; BORDER-RIGHT: windowtext 1pt solid; PADDING-TOP: 0cm" vAlign=top width=103>

    95%

     95%

Superior Characteristics
 
The EB electronic ballast has the following advantages:
1.    Wide working voltage range: 90V~260V, it is applicable to the fluctuating in voltage of the power supply.
2.    Small start current: The start current of HID-EB series electronic ballast is small, which can lengthen service life and reduce the expenses for the first installation.
3.    High power factor: ≥0.98
4.    Permanent power: Constant output power by voltage fluctuating 90V~260V, can guarantee lighting quality and illumination intensity permanently.
5.    Wide application range: Do not flicker even though working with low quality bulbs whose frequency is 120Hz, suitable for the commercial lighting.
6.    Low harmonic content: THD<10%.
7.    Protective function: Break circuit, short circuit and hot protection.
8.    Simple installation: No need other boots, no need external compensating capacitor. 
 
Installation Instructions
 
1.      Use:
The electronic ballast is used with HID lamps. The trigger function is integrated inside. It has excellent features of high efficient, safe, constant output power etc., and can be used in such places as road, square, station, quay and factory, etc.
 
2.      Installation:

 

Please install the circuit according to the diagram and guarantee the reliable connection for each point.
 
Please use the cable which can bear voltage > 6KV between the electronic ballast and the light. The length should not exceed 20 meters. Make adjustment according to the installation and specific demands.
 
Cautions
1.      To ensure the best working state of light source, the electronic ballast should be used together with the corresponding related bulbs.
2.      The instantaneous output voltage may reach above 3KV (reaches the end of the light ). When not in use, for maintaining please switch off the power.
3.      The input rated voltage-frequency is 120V / 240V, 50Hz / 60Hz, and the operating voltage range is 90V~260V. Please don't try to use the electronic ballast in the exceeding voltage range.
4.      Environment temperature should be -40℃~+50℃. If the temperature exceeds this range, the bulb can’t start normally and the ballast life-span will be shortened.
5.      The electronic ballast could restart after the lamp is cooled. Because of the different characteristic between high-pressure sodium lamp and metal halide lamp, there is a time difference to restart the device. The sodium lamp may need to wait 1-2 minutes, and the metal halide lamp may need to wait 3-6 minutes. 
 
Common Faults and Troubleshooting

Fault Phenomenon

Treatment

 

Cannot light up after installation

 

1.    Confirm whether there is rated input voltage;

2.    Electrify the ballast for 2 minutes. If it still can't light up, turn off the power, and check whether the circuit maintain in good contact.

3.     Replace the lamp and then try again.

 

The bulb goes out immediately after light up

1.    Check whether the bulb is tight, or the power cord is in good contact;

2.    Check whether the bulb restarts after goes out or the bulb is completely cooled;

3.     If this situation still remains, replace the bulb.

Although working but continuously flashing

1.      Check whether the bulb is tight;

2.      Whether the bulb works in the more violent vibrations place;

3.      Replace the bulb.

 

 

The bulb goes out after working for a long time

1.    The environment temperature is too high that the ballast comes to overheat protection automatically (This phenomenon may occur when installation environment temperature exceeds 70);

2.    Lamp life has reached, please replace it;

3.     Replace the ballast.

Remarks:
Maker Lighting Company Limited has the final explanation right!
 
Best Regards,
Marketing Team
Maker Lighting Company Limited
The professional Lighting Supplier!
ISO 9001 &14001, CE, RoHS, UL, CSA Certificated
PRC Tel: +86-020-22078445
HK Address: UNIT 04, 7/F, BRIGHT WAY TOWER 33 MONG KOK RD, KL, HK

Update:11/23/2011

 

Copyright © 2009-2012 Maker Lighting Company Limited all rights reserved Powered by PSStudio